• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
Activating the appliance
Press Ein/Aus - Marche/Arrêt to activate or
deactivate the appliance. A tune sounds
when the appliance is activated.
Setting a programme
1.
Turn the programme knob and set the
programme:
• The indicator Start/Pause - Départ/
Pause flashes.
• The display shows the programme
duration.
2. If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you acti-
vate an option, the indicator of the set
option comes on.
If you set something incorrect, the dis-
play shows the message Err.
Starting a programme without
delay start
Press Start/Pause - Départ/Pause:
• The indicator Start/Pause - Départ/Pause
stops to flash and stays on.
• The programme starts, the door is locked
and the display shows the indicator
.
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automatically
the programme duration agree with
the laundry load.
• The display shows the new value.
Starting a programme with
delay start
• Press Zeitvorwahl - Départ Différé again
and again until the display shows the de-
lay you want to set.
• Press Start/Pause - Départ/Pause:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set of
the delay start before you press Start/
Pause - Départ/Pause.
To cancel the delay start:
1.
Press Start/Pause - Départ/Pause to
set the appliance to pause.
2. Press Zeitvorwahl - Départ Différé until
the display shows
’.
Press Start/Pause - Départ/Pause
again to start the programme immedi-
ately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Press Start/Pause - Départ/Pause. The
indicator flashes.
2.
Change the options.
3.
Press Start/Pause - Départ/Pause
again. The programme continues.
Cancel a programme
1.
Turn the programme knob to
to
cancel the programme.
2.
Turn again the programme knob to a
new washing programme. At this time
you can also set the available functions.
The appliance does not drain the wa-
ter.
Opening the door
While a programme or the delay start oper-
ates, the appliance door is locked and the
display shows the indicator
.
Caution! If the temperature and level
of the water in the drum are too high,
you cannot open the door.
11
Comments to this Manuals