FORS ASW714 User Manual download pdf (Page 21)

Cleaning the inlet hose and the valve filter

1.

1

2

3

2.

3. 4.

45°

20°

Emergency drain

Because of a malfunction, the appliance

cannot drain the water.

If this occurs, do steps (1) through (9) of

'Cleaning the drain filter'. If necessary, clean

the pump.

When you drain the water with the

emergency drain procedure, you must

activate again the drain system:

1. When you drain the water with the

emergency drain procedure, you must

activate again the drain system: Put 2

litres of water in the main wash

compartment of the detergent

dispenser.

2.

Start the programme to drain the water

Frost precautions

If the appliance is installed in an area where

the temperature can be less than 0° C,

remove the remaining water from the inlet

hose and the drain pump.

1. Disconnect the mains plug from the

mains socket.

2. Close the water tap.

3. Put the two ends of the inlet hose in a

container and let the water flow out of

the hose.

4. Empty the drain pump. Refer to the

emergency drain procedure.

5. When the drain pump is empty, install

the inlet hose again.

WARNING! Make sure that the

temperature is more than 0 °C

before you use the appliance

again. The manufacturer is not

responsible for damages caused

by low temperatures.

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Comments to this Manuals

No comments